论文摘要
A novel method for the analysis of composition distribution of titanium alloys over a large area(64 mm × 72 mm) was investigated by exploring the original position statistic distribution based on spark spectrum(OPA-SS) in Ti-6.5 Al-1.0 Cr-0.5 Fe-6.0 Mo-3.0-Sn-4.0 Zr titanium alloy. The results showed that OPA-SS could characterize the distribution of elements in different positions on the titanium alloy. The macrosegregation of Sn was the most pronounced, with a statistic segregation degree higher than 18%; the macrosegregation of Mo followed with a statistic segregation degree of 10%; the macrosegregation of Al and Fe was relatively milder,lower than 8%. The main reason for the macrosegregation state of the as-cast Ti-6.5 Al-1.0 Cr-0.5 Fe-6.0 Mo-3.0 Sn-4.0 Zr alloy can be the solute redistribution during liquid solidification and the diffusion rate of each element in the solid phase.
论文目录
文章来源
类型: 期刊论文
作者: Xin Liu,Guang Feng,Yu Zhou,Qunbo Fan
来源: Progress in Natural Science:Materials International 2019年02期
年度: 2019
分类: 基础科学,工程科技Ⅰ辑
专业: 金属学及金属工艺
单位: School of Materials Science and Engineering, Beijing Institute of Technology,National Key Laboratory of Science and Technology on Materials Under Shock and Impact, Beijing Institute of Technology,Central Iron and Steel Research Institute
基金: supported by the Chinese National Natural Science Foundation of China(Grant No.51571031)
分类号: TG146.23
页码: 224-230
总页数: 7
文件大小: 10515K
下载量: 3
相关论文文献
- [1].Surface treatment of titanium dental implant with H_2O_2 solution[J]. International Journal of Minerals Metallurgy and Materials 2020(09)
- [2].Epithelial cell adhesion efficacy of a novel peptide identified by panning on a smooth titanium surface[J]. International Journal of Oral Science 2018(03)
- [3].Effect of niobium alloying level on the oxidation behavior of titanium aluminides at 850°C[J]. International Journal of Minerals Metallurgy and Materials 2016(12)
- [4].Failure behavior of cellular titanium under dynamic loading[J]. Science China(Technological Sciences) 2017(04)
- [5].Recovery of titania from high titanium slag by roasting method using concentrated sulfuric acid[J]. Rare Metals 2015(12)
- [6].Physical properties of WSTi3515S burn-resistant titanium alloy[J]. Rare Metals 2016(05)
- [7].Phase transformation behavior of titanium during carbothermic reduction of titanomagnetite ironsand[J]. International Journal of Minerals Metallurgy and Materials 2016(07)
- [8].Defect-mediated reactivity of Pt/TiO_2 catalysts: the different role of titanium and oxygen vacancies[J]. Science China(Chemistry) 2020(09)
- [9].3DPMD-Arc-based additive manufacturing with titanium powder as raw material[J]. China Welding 2019(01)
- [10].Impact of polydimethylsiloxanes on physicochemical and tribological properties of naphthenic mineral oil(KN 4010)-based titanium complex grease[J]. Chinese Journal of Chemical Engineering 2019(04)
- [11].Microstructure and properties of nitrided layer of titanium plate,produced by simultaneous laser quenching and liquid-nitrogen cryogenics[J]. Science China(Technological Sciences) 2018(12)
- [12].Grain size model for continuous dynamic recrystallization of titanium alloy in hot deformation[J]. Science China(Technological Sciences) 2018(11)
- [13].Gas-phase hydrogenation influence on defect behavior in titanium-based hydrogen-storage material[J]. Progress in Natural Science:Materials International 2017(01)
- [14].Synthesis,properties,and applications of black titanium dioxide nanomaterials[J]. Science Bulletin 2017(06)
- [15].Ductile fracture behavior of TA15 titanium alloy at elevated temperatures[J]. International Journal of Minerals Metallurgy and Materials 2015(10)
- [16].Extraction behaviours of titanium and other impurities in the decomposition process of ilmenite by highly concentrated KOH solution[J]. International Journal of Minerals Metallurgy and Materials 2012(01)
- [17].Recent developments in plastic forming technology of titanium alloys[J]. Science China Technological Sciences 2011(02)
- [18].Development of a database system for operational use in the selection of titanium alloys[J]. International Journal of Minerals Metallurgy and Materials 2011(04)
- [19].Structure and Corrosion Behaviours of Mo Modified Titanium in Saliva[J]. Journal of Wuhan University of Technology(Materials Science Edition) 2010(04)
- [20].Chinese titanium industry[J]. China Nonferrous Metals Monthly 2010(09)
- [21].Hot deformation behavior and microstructure evolution of TC4 titanium alloy[J]. Transactions of Nonferrous Metals Society of China 2010(11)
- [22].Corrosion of titanium in phosphoric acid at 250 ℃[J]. Transactions of Nonferrous Metals Society of China 2009(03)
- [23].Explosive Growth in China's Titanium Industry in 2007[J]. China Nonferrous Metals Monthly 2008(06)
- [24].Internal state variable models for micro-structure in high temperature deformation of titanium alloys[J]. Science in China(Series E:Technological Sciences) 2008(11)
- [25].Precipitates and alloying elements distribution in near α titanium alloy Ti65[J]. Journal of Materials Science & Technology 2020(01)
- [26].High strain rate deformation of explosion-welded Ti6Al4V/pure titanium[J]. Defence Technology 2020(03)
- [27].Recent progress in the simulation of microstructure evolution in titanium alloys[J]. Progress in Natural Science:Materials International 2019(03)
- [28].Flow behavior and processing map for hot deformation of ATI425 titanium alloy[J]. Journal of Materials Science & Technology 2018(04)
- [29].Distinct dendritic α phase emerging on the surface of primary α phase in a compressed near-α titanium alloy[J]. Journal of Materials Science & Technology 2018(04)
- [30].Rapid and Green Fabrication of Micro- and Nano-Structural Titanium Dioxide Coatings on Titanium and Its Alloy[J]. 功能材料信息 2016(04)